Why to Choose an Electric Wire Rope Hoist
Introduction
The electric wire rope hoist manufacturer in Ahmedabad is designed for its durability and flexibility and there is multiple reasons which need to look out for choosing the electric chain hoist
1. Use guide chain: –Guide chain is manufactured in such a way that load chain can freely lift and fall.
2. New version of suction rotary motor brake: – Suction rotary motor brake which is made of non-asbestos which make hoist stop running when power get fail and this is done precisely and effectively. For this alternate or direct current is installed and when it is done, brake get off when power get off and then hoist work is power on, this help for surviving the failure of closed circuit of the motor.
3. High frequency motor made by cooling fan: – To increase Short time rating and repeated rating high frequency motor with cooling fan is installed.
4. Less- noise transmission gear: – For increasing hoist life noiselessly, precise spiral gears which are made of intensive alloy steel are soaked in the oil.
5. Upper limit switch: – Over Lifting can cause a big problem so to prevent that upper limit switch is made which stop the hoist when lifting is done.
6. Highly durable chain bag: – Durability of the canvas chain bag is high.
7. Aluminum case is intensive: –The original moulded hoist case is made of light structure and notable appearance which can gain everyone attention.
8. Special over rolling protective device: – Due to advanced technology newly designed device of friction clutch is used to soak the oil which prevent hoist from rolling up or being overloaded.
9. Examination and maintenance is required: – For doing spot examination and maintenance the control case is convenient and hinge. On the same board all electric switch are installed.
10. Emergency stop button: –If there is case of emergency in the organisation then user or labor can shut off the power supply by operating the emergency stop.
11. Buttons are durable: – Working in every machine requires security and for that buttons are made convenient which can be operated easily and are of low voltage.
12. Bottom Hook: –Bottom hook is made of hot forging which have perfect strength which is hard to break. Lower hook operation safety is ensured by its 360 degree rotation and safety tongue piece.
Conclusion
These are the above reasons which enforce organisation to use electric hoist which grow strength, durability and quality of the company in the market and increase their level in the competition.
